<optgroup id="wmwrt"><li id="wmwrt"><del id="wmwrt"></del></li></optgroup>
    <legend id="wmwrt"><li id="wmwrt"><del id="wmwrt"></del></li></legend>
    <optgroup id="wmwrt"><li id="wmwrt"></li></optgroup>
  1. <ol id="wmwrt"></ol>
    1. <span id="wmwrt"><output id="wmwrt"></output></span>
           
       
       
       
      首頁-產品展示-詳細內容
       
      PGWGJ0703自動高溫高剪切粘度測定器
      檢測原理:
      高溫高剪切粘度測定儀參照SH/T0703、ASTM D5481標準設計和生產,用于測定機油在高溫高剪切條件下的粘度值。在150℃的恒溫條件下,注射管內的油樣通過連接注射管的氣泵實現進樣和標量,并在0.5-3.5MPa的惰性氣體壓力下流經0.15mm內徑的毛細管,以模擬高溫高剪切的實際應用場景。實驗自動記錄時長和實驗穩定氣壓,并自動計算待測油樣的高溫高剪切粘度值。
      技術參數:
      試驗標準:SH/T0703、ASTM D5481
      電源:220V 50Hz
      控溫方式:鋁浴恒溫
      控溫范圍:實驗:150±0.1℃
      粘度池數:1管
      毛細管內徑:0.15 mm
      毛細管有效長度:16-18 mm
      氣壓范圍:0.5-3.5 MPa
      自動檢測、自動打印結果
      主要特點
      1、該儀器為國內首創,無轉動部件,低故障率,維護成本低
      2、采用專用的軟件,自動檢測結果;
      3、玻璃毛細管符合標準要求,直徑 0.15mm,長 16mm;
      4、對于以研究為目的用戶可設置不同的剪切速率和試驗溫度;
      5、儀器采用單管檢測,方便快捷
      PGWGJ0703 automatic high temperature high shear viscosity meter
      Detection principle:
      High temperature high shear viscosity meter (SH/T0703, ASTM D5481 standard design and production, is used to measure the oil under the condition of high temperature and high shear viscosity values.At 150 ℃ under the condition of constant temperature, the injection tube sample injection by connecting tube of the pump to achieve sampling and scalar, and 0.5 3.5 MPa in inert gas under pressure through the 0.15 mm diameter of capillary, to simulate the practical application of high temperature and high shear.Experiments for the automatic recording time and stable air pressure, and automatically calculate the high temperature high shear viscosity of the sample under test values.
      Technical parameters:
      Test standard: SH/T0703, ASTM D5481
      Power supply: 220 v, 50 hz
      Temperature control: aluminum bath temperature
      Temperature control range: experiment: 150 + 0.1 ℃
      Viscosity pool number: 1 tube
      Capillary inner diameter: 0.15 mm
      The effective length of capillary: 16 to 18 mm
      Pressure range: 0.5 to 3.5 MPa
      Automatic detection, automatic printing results
      The main features
      1, the instrument for domestic initiative, no moving parts, low failure rate, low maintenance cost 
      2, using special software, automatic test results;
      3, glass capillary conform to the requirements of the standard, diameter of 0.15 mm, 16 mm long;
      4, in the research for the purpose of users can set different shear rate and test temperature;
      5, instrument using single tube detection, convenient and quick

       
         
      友情鏈接  

       

      主要產品:閃點儀,開口閃點儀,閉口閃點儀,全自動自燃點測試儀,運動粘度檢測設備,石油化驗儀器
      版權所有 吉林市普銳特科技有限責任公司 技術支持:百航科技 吉ICP備07002994號-1 
      地址:吉林高新區烽火街烽火菜市場20號網點 網址:www.yourartmuseum.com 郵箱:prtlz@163.com
      手機:13944694406    電話:0432-66180758    售后電話:0432-68080211

      色视频www在线播放国产人成_色欲影视淫色淫香_国产成人AV免观看_中文无码乱人伦中文视频在线